RoundSplit – Stabilizer – AH725
IMPROVED TOOL LIFE & PRODUCTIVITY
High productivity and longer tool life!
Machining of long shafts with supports just at the end-faces problems of vibration during machining. This results in limited cutting speeds and also lower tool life.
Roundsplit’s MJ geometry’s low cutting force and popular wear resistant AH725 grade allows stable and 3 times long tool life even at 40% higher cutting speeds.
Share
| Industry | Engineering |
|---|---|
| Component | Stabilizer |
| Material ISO code |
 P - Steel |
| Work material | High alloyed steel |
| Machine(spindle type) | Vertical Machining Center Middle(#40,HSK63) |
| Tool family | Milling |
| Tool category | Face milling |
| Product name | RoundSplit |
| TSR No. | 248M |
Tool
| Tungaloy | Competitor | |
|---|---|---|
| Body | TRC12R080M27.0E07 | Round insert cutter |
| Effective number of teeth | 7 | 7 |
| Cutting diameter | 80 | 80 |
| Insert | RCMT1204EN-MJ | Round insert |
| Grade | AH725 | PVD |
Cutting conditions
| Tungaloy | Competitor | |
|---|---|---|
| Cutting speed V/c (mm/min) | 100 | 70 |
| Feed per tooth f/z (mm/t) | 0.1 | 0.1 |
| Feed speed Vf (mm/min) | 279 | 195 |
| Depth of cut ap (mm) | 5 | 5 |
| Width of cut ae (mm) | 40 | 40 |
| Coolant | Internal+external | Internal+external |