TUNGCUT – Pulley – AH725
IMPROVED TOOL LIFE
DGM type demonstrates remarkable chip control even when machining Fe360 material, which has difficult chip control. This is possible because DGM type breaks chips into smaller pieces credit to well-designed chipbreaker. DGM type significantly improves productivity since it allows higher feed than the competitor and the fact that it does not require step-feed. AH725’s excellent wear resistance doubles the tool life.
Share
![TungCut](https://tsr.tungaloy.com/wp-content/uploads/products/tsr_product_tungcut.jpg)
Industry | Automotive |
---|---|
Component | Pulley |
Material ISO code |
|
Work material | Fe360 |
Machine(spindle type) | CNC Lathe |
Tool family | Turning |
Tool category | External grooving |
Product name | TungCut |
TSR No. | 111T |
![Pulley](https://tsr.tungaloy.com/wp-content/uploads/work/work_1728T.jpg)
Tool
Tungaloy | Competitor | |
---|---|---|
Holder | CTER3232-8T25 | 32x32 shank |
Insert | DGM8-040 | 2 corner insert |
Edges par insert | 2 | 2 |
Grade | AH725 | PVD |
Tool life
Tungaloy | Competitor | |
---|---|---|
Tool life (pcs/edge) | 2 | 1 |
Cutting conditions
Tungaloy | Competitor | |
---|---|---|
Cutting speed V/c (mm/min) | 140 | 150 |
Feed f (mm/rev) | 0.45 | 0.15 (Step per 1mm) |
Depth of cut ap (mm) | 22 | 22 |
Coolant | Water soluble | Water soluble |