DoPent – Block Part – T3225
IMPROVED AND STABLE MACHINING ON MACHINE WITH LOW RIGIDITY
Stable machining on the machine with low rigidity - DoPent’s sharp yet tough cutting edge in CVD grade T3225 achieved longer tool life since T3225 has good thermal crack resistance in wet cutting condition. The competitor’s insert had fracture due to chipping on its cutting edge.
Share
| Industry | Engineering |
|---|---|
| Component | Blocks |
| Material ISO code |
 P - Steel |
| Work material | DIN C50 |
| Machine(spindle type) | Vertical Machining Center |
| Tool family | Milling |
| Tool category | Face milling |
| Product name | DoPent |
| TSR No. | 416M |
Tool
| Tungaloy | Competitor | |
|---|---|---|
| Body | TEN09R080M25.4-04 | Face mill cutter |
| Effective number of teeth | 10 | 8 |
| Cutting diameter | 80 | 80 |
| Insert | PNCU0905GNER-MJ | Square type negative insert |
| Number of cutting edges | 10 | 8 |
| Grade | T3225 | PVD P20 |
Cutting conditions
| Tungaloy | Competitor | |
|---|---|---|
| Cutting speed V/c (mm/min) | 150 | 150 |
| Feed per tooth f/z (mm/t) | 0.25 | 0.25 |
| Feed speed Vf (mm/min) | 597 | 597 |
| Depth of cut ap (mm) | 2 | 2 |
| Width of cut ae (mm) | 50 | 50 |
| Coolant | External | External |