DoPent – Thin Workpiece – AH3135
STABLE MACHINING OF THIN WORKPIECE
Stable machining
- The workpiece is very thin & the clamping rigidity is very low. DoPent machined the workpiece without chipping because of low thrust force due to its 70-degree approach angle and sharp cutting edge. The competitor had fracture on the insert since chattering occurred due to big thrust force and weak cutting edge.
Share
| Industry | Engineering |
|---|---|
| Component | Thin Workpiece |
| Material ISO code |
 P - Steel |
| Work material | SS400 |
| Machine(spindle type) | Vertical Machining Center |
| Tool family | Milling |
| Tool category | Face milling |
| Product name | DoPent |
| TSR No. | 414M |
Tool
| Tungaloy | Competitor | |
|---|---|---|
| Body | EEN09R050M32.0-04 | Face mill cutter |
| Effective number of teeth | 4 | 4 |
| Cutting diameter | 50 | 50 |
| Insert | PNMU0905GNEN-MJ | Square type negative insert |
| Number of cutting edges | 10 | 8 |
| Grade | AH3135 | PVD P20 |
Cutting conditions
| Tungaloy | Competitor | |
|---|---|---|
| Cutting speed V/c (mm/min) | 160 | 160 |
| Feed per tooth f/z (mm/t) | 0.2 | 0.2 |
| Feed speed Vf (mm/min) | 815 | 815 |
| Depth of cut ap (mm) | 1 | 1 |
| Width of cut ae (mm) | 40 | 40 |
| Coolant | Dry | Dry |