Tung-AluMill – Cylinder Head – TH10


High productivity
– Tung-AluMill’s positive cutting edge geometry was able to work even on low speed machine with increased parameters thus increasing Metal removal rate by more than 3 times than the competitor.

Long tool life
– TH10, polished grade, showed good wear resistance against the
current tool.

Industry Automotive
Component Cylinder Head
Material ISO code N - Non-ferrous metalN - Non-ferrous metal
Work material aluminium
Machine(spindle type) Vertical Machining Center
Tool family Milling
Tool category Face milling
Product name TungAluMill
TSR No. 339M
Cylinder Head


Tungaloy Competitor
Body TPV16R300U0100A05 Face milling cutter
Effective number of teeth 5 5
Cutting diameter 76.2 80
Insert XVCT160508R-AJ 2 corner positive insert
Number of cutting edges 2 2
Grade TH10 Non coated carbide

Cutting conditions

Tungaloy Competitor
Cutting speed V/c (mm/min) 488 488
Feed per tooth f/z (mm/t) 0.41 0.25
Feed speed Vf (mm/min) 4136 2585
Depth of cut ap (mm) 12.7 10.16
Width of cut ae (mm) 76.2 50.8
Coolant Wet (External) Wet (External)


Metal removal rate3 times