TungCut – Sleeve – AH725
IMPROVED TOOL LIFE
While the competitor often causes chip control troubles, TungCut creates short chips due to the excellent chip control of DGM insert and the effect of Step feed. DGM type insert provides shorter machining time with higher feed compared to the competitor even in the step feed cutting. AH725 grade allows stable and long tool life due to an exceptional wear resistance, even when machining high alloy steels.
Share
![TungCut](https://tsr.tungaloy.com/wp-content/uploads/products/tsr_product_tungcut.jpg)
Industry | Engineering |
---|---|
Component | Sleeve |
Material ISO code |
|
Work material | 33CrMoV12-9 |
Machine(spindle type) | CNC Lathe |
Tool family | Turning |
Tool category | Parting off |
Product name | TungCut |
TSR No. | 115T |
![Sleeve](https://tsr.tungaloy.com/wp-content/uploads/work/work_1536T.jpg)
Tool
Tungaloy | Competitor | |
---|---|---|
Holder | CTER2020-3T20 | 20X20 shank |
Insert | DGM3-020 | 2 corner insert |
Grade | AH725 | PVD |
Tool life
Tungaloy | Competitor | |
---|---|---|
Tool life (pcs/edge) | 620 | 270 |
Cutting conditions
Tungaloy | Competitor | |
---|---|---|
Cutting speed V/c (mm/min) | 90 | 90 |
Feed f (mm/rev) | 0.08 | 0.06 |
Coolant | Water soluble | Water soluble |