DuoJustCut – Shaft part – SH725
IMPROVEMENT OF CHIP CONTROL AND SURFACE QUALITY
DuoJustCut 0.8 mm-wide parting insert produced curled chips with consistency and improved surface quality thanks to its effective pressed-in 3D chipbreaker. In addition, using a thinner insert enabled it to remove and waste as little material as possible in the parting process.
Share
| Industry | Miniature |
|---|---|
| Component | Shaft |
| Material ISO code |
 P - Steel |
| Work material | SUS316L |
| Machine(spindle type) | Swiss Lathe |
| Tool family | Turning |
| Tool category | Parting off |
| Product name | DuoJust-Cut |
| TSR No. | 1701T |
Tool
| Tungaloy | Competitor | |
|---|---|---|
| Holder | JSXXR1212X09 | 12mmSquare shank |
| Insert | JXPS12R08F | Ground chipbreaker |
| Cutting width | 0.8 | 2 |
| Grade | SH725 | PVD (P25) |
Tool life
| Tungaloy | Competitor | |
|---|---|---|
| Tool life (pcs/edge) | 1000 | 1000 |
Cutting conditions
| Tungaloy | Competitor | |
|---|---|---|
| Cutting speed V/c (mm/min) | 80 | 80 |
| Feed f (mm/rev) | 0.02 | 0.02 |
| Coolant | External supply | External supply |