TungCut (DGS1.2) – Camera Part – AH725
REDUCTION OF MACHINE DOWNTIME
TungCut 1.2 mm width parting insert and its unique side- clamp holder allowed easy and secure insert clamping. The unique system eliminated key interference with the adjacent tools on the gang slide, allowing quick insert changes while the holder remained in the machine. As the result, insert change time was shortened by 82%.
Share
| Industry | Miniature |
|---|---|
| Component | Camera Part |
| Material ISO code |
 M - Stainless steel |
| Work material | SUS303 |
| Machine(spindle type) | Swiss Lathe |
| Tool family | Turning |
| Tool category | Parting off |
| Product name | TungCut |
| TSR No. | 1601T |
Tool
| Tungaloy | Competitor | |
|---|---|---|
| Holder | JTTEL1212X1.2D16 | 12x12 square holder |
| Insert | DGS1.2-003 | Doble-ended insert |
| Cutting width | 1.2 | 1.3 |
| Grade | AH725 | PVD |
Cutting conditions
| Tungaloy | Competitor | |
|---|---|---|
| Cutting speed V/c (mm/min) | 45 | 45 |
| Feed f (mm/rev) | 0.03 | 0.03 |
| Insert exchange time (seconds) | 17 | 92 |
| Coolant | Wet | Wet |