NTK PVD Carbide CTP/CTPA-CX – Shaft -ST4
NTK PVD Carbide CTP/CTPA-CX - Shaft -ST4
With the conventional product, continuous chip jamming occurred due to declining cutting performance, limiting tool life to around 400 parts.
By switching to CX Chipbreaker, chip control was significantly improved, resulting in a 1.6 times increase in tool life.
Share
| Industry | Miniature |
|---|---|
| Component | Shaft |
| Material ISO code |
 M - Stainless steel |
| Work material | SUS304 |
| Machine(spindle type) | Swiss Lathe |
| Tool family | Grooving |
| Tool category | Parting off |
| Product name | NTK PVD Carbide CTP/CTPA-CX |
| TSR No. | 5594G |
Tool
| Tungaloy - NTK | Competitor | |
|---|---|---|
| Insert | CTP13FRN-CX | Parting-off insert |
| Edges par insert | 2 | 2 |
| Grade | ST4 | PVD Carbide |
Tool life
| Tungaloy - NTK | Competitor | |
|---|---|---|
| Tool life (pcs/edge) | 800 | 500 |
Cutting conditions
| Tungaloy - NTK | Competitor | |
|---|---|---|
| Cutting speed V/c (m/min) | 80 | 80 |
| Feed f (mm/rev) | 0.04 | 0.04 |
| Number of pass | 1 | 1 |
| Coolant | WET | WET |