Tung-Tri – Sputtering Target – AH3135
IMPROVED MACHINING STABILITY
Smooth machining
-TungTri allows smooth machining without chattering due to its positive rake angle. This series can be also used for ramping. In contrast, the competitor’s tool provides problem completing the machining due to awful chattering, leaving the workpiece deformed. In addition, the competitor’s tool cannot be applied to ramping.
Share
| Industry | Engineering |
|---|---|
| Component | Sputtering Target |
| Material ISO code |
 N - Non-ferrous metal |
| Work material | Copper Alloys |
| Machine(spindle type) | Machining Center |
| Tool family | Milling |
| Tool category | Helical interpolation |
| Product name | Tung-Tri |
| TSR No. | 307M |
Tool
| Tungaloy | Competitor | |
|---|---|---|
| Body | TPA15R063M22.0E05 | Shoulder milling cutter |
| Effective number of teeth | 5 | 5 |
| Cutting diameter | 63 | 63 |
| Insert | TOMT150604PDER-MJ | 2 corner positive insert |
| Number of cutting edges | 3 | 2 |
| Grade | AH3135 | PVD |
Cutting conditions
| Tungaloy | Competitor | |
|---|---|---|
| Cutting speed V/c (mm/min) | 300 | 300 |
| Feed per tooth f/z (mm/t) | 0.2 | 0.2 |
| Feed speed Vf (mm/min) | 1516 | 1516 |
| Depth of cut ap (mm) | 2.5 | 2.5 |
| Width of cut ae (mm) | 63 | 63 |
| Coolant | Wet (Internal) | Wet (Internal) |