Tung-AluMill – Wrist of Robot Arm – TH10
IMPROVED PRODUCTIVITY
High productivity
-Tung-AluMill’s simple pocket design allows higher number of pockets in the
body and High positive rake reduces cutting force allowing Higher
productivity without vibration thus reducing machining cost.
Excellent wall surface accuracy
-Tung-AluMill provides a great wall surface accuracy and better surface finish
than competitor thanks to its optimally-designed helical cutting edges which
allows low cutting force.
Share
![TungAluMill](https://tsr.tungaloy.com/wp-content/uploads/products/tsr_product_tungalumill.jpg)
Industry | Engineering |
---|---|
Component | Wrist of Robot Arm |
Material ISO code |
|
Work material | 2017 |
Machine(spindle type) | Horizontal Machining Center Large(#50,HSK100) |
Tool family | Milling |
Tool category | Shoulder milling |
Product name | TungAluMill |
TSR No. | 288M |
![Wrist of Robot Arm](https://tsr.tungaloy.com/wp-content/uploads/work/work_288M.jpg)
Tool
Tungaloy | Competitor | |
---|---|---|
Body | TPV16R050M22.0E04 | Shoulder milling cutter |
Effective number of teeth | 4 | 3 |
Cutting diameter | 50 | 50 |
Insert | XVCT160504R-AJ | 2 corner positive insert |
Number of cutting edges | 2 | 2 |
Grade | TH10 | Non coated carbide |
Cutting conditions
Tungaloy | Competitor | |
---|---|---|
Cutting speed V/c (mm/min) | 850 | 850 |
Feed per tooth f/z (mm/t) | 0.18 | 0.18 |
Feed speed Vf (mm/min) | 4000 | 3000 |
Depth of cut ap (mm) | 10 | 10 |
Width of cut ae (mm) | 5 | 5 |
Coolant | Wet | Wet |