TetraForce-Cut – Shaft – AH725
IMPROVED PRODUCTIVITY & TOOL LIFE
Good chip evacuation
The current item had trouble with chip evacuation because of a ground chip breaker. Also, the chip breaker often scratched the workpiece, producing more defects.
TetraForce-Cut controls chipping using a 3-dimensional chipbreaker without wrapping around the tool or workpiece. As a result, TetraForce-Cut perfectly machined with no defective products.
Highly stable machining
The combination of a sharp chipbreaker and AH725 with high wear resistance provides stable and long tool life.
Share
![TetraForce-Cut](https://tsr.tungaloy.com/wp-content/uploads/products/tsr_product_tetraforce-cut.jpg)
Industry | Automotive |
---|---|
Component | Shaft |
Material ISO code |
|
Work material | C45 |
Machine(spindle type) | CNC Lathe |
Tool family | Turning |
Tool category | Parting off |
Product name | TetraForce-Cut |
TSR No. | 252T |
![Shaft](https://tsr.tungaloy.com/wp-content/uploads/work/work_331T.jpg)
Tool
Tungaloy | Competitor | |
---|---|---|
Holder | STCL1212-27 | 12X12 shank |
Insert | TCS27-150-020 | 1,5mm width insert |
Cutting width | 1.5 mm | 1.5 mm |
Grade | AH725 | PVD |
Cutting conditions
Tungaloy | Competitor | |
---|---|---|
Cutting speed V/c (mm/min) | 60 | 60 |
Feed f (mm/rev) | 0.08 | 0.08 |
Coolant | Water soluble | Water soluble |