TetraForce-Cut – O-Ring – AH725
IMPROVED TOOL LIFE
Excellent chip control - The chip control of the current tool is not good, as it has a ground chipbreaker. Therefore, the chips hit the machined surface and spoil the surface finish. TetraCut can achieve a good surface finish because it has a very sharp chipbreaker, and the molded chipbreaker improves chip control. Excellent wear resistance - By combining with AH725, which has superior wear and a sharp chipbreaker, TetraCut improves tool life to 1.25 times.
Share
| Industry | Automotive |
|---|---|
| Component | O-Ring |
| Material ISO code |
 P - Steel |
| Work material | C45 |
| Machine(spindle type) | CNC Lathe |
| Tool family | Turning |
| Tool category | External grooving |
| Product name | TetraForce-Cut |
| TSR No. | 213T |
Tool
| Tungaloy | Competitor | |
|---|---|---|
| Holder | STCL2020-27 | 20x20 shank |
| Insert | TCS27-125-020 | 3 corner insert |
| Edges par insert | 4 | 3 |
| Cutting width | 1.25 | 1.25 |
| Grade | AH725 | PVD |
Tool life
| Tungaloy | Competitor | |
|---|---|---|
| Tool life (pcs/edge) | 250 | 200 |
Cutting conditions
| Tungaloy | Competitor | |
|---|---|---|
| Cutting speed V/c (mm/min) | 100 | 100 |
| Feed f (mm/rev) | 0.05 | 0.05 |
| Coolant | Water soluble | Water soluble |