TungAluMill – Cylinder Head – TH10
IMPROVED PRODUCTIVITY
High productivity
– TungAluMill’s positive cutting edge geometry was able to work even on low speed machine with increased parameters thus increasing Metal removal rate by more than 3 times than the competitor.
Long tool life
– TH10, polished grade, showed good wear resistance against the current tool.
Share
| Industry | Automotive |
|---|---|
| Component | Cylinder Head |
| Material ISO code |
 N - Non-ferrous metal |
| Work material | aluminium |
| Machine(spindle type) | Vertical Machining Center |
| Tool family | Milling |
| Tool category | Face milling |
| Product name | TungAluMill |
| TSR No. | 339M |
Tool
| Tungaloy | Competitor | |
|---|---|---|
| Body | TPV16R300U0100A05 | Face milling cutter |
| Effective number of teeth | 5 | 5 |
| Cutting diameter | 76.2 | 80 |
| Insert | XVCT160508R-AJ | 2 corner positive insert |
| Number of cutting edges | 2 | 2 |
| Grade | TH10 | Non coated carbide |
Cutting conditions
| Tungaloy | Competitor | |
|---|---|---|
| Cutting speed V/c (m/min) | 488 | 488 |
| Feed per tooth f/z (mm/t) | 0.41 | 0.25 |
| Feed speed Vf (mm/min) | 4136 | 2585 |
| Depth of cut ap (mm) | 12.7 | 10.16 |
| Width of cut ae (mm) | 76.2 | 50.8 |
| Coolant | Wet (External) | Wet (External) |