DoPent – Stage1 Shroud – AH725
IMPROVED PRODUCTIVITY ＆ TOOL LIFE
High productivity
- DoPent’s sharp yet tough rake face shows good and stable cutting even at higher feed rates. Cycle time was decreased by 35%.
Long tool life
-AH725 with its submicron substrate and a high chipping resistant PremiumTec coating shows Double tool life than competitor.
Share
| Industry | Power Generation |
|---|---|
| Component | Stage1 Shroud |
| Material ISO code |
 S - Super-alloys and titanium |
| Work material | HR-120 |
| Machine(spindle type) | Vertical Machining Center Large(#50,HSK100) |
| Tool family | Milling |
| Tool category | Face milling |
| Product name | DoPent |
| TSR No. | 277M |
Tool
| Tungaloy | Competitor | |
|---|---|---|
| Body | TEN09R063M22.0-06 | Face mill cutter |
| Effective number of teeth | 6 | 5 |
| Cutting diameter | 63 | 80 |
| Insert | PNCU0905GNER-MJ | Octagonal positive insert |
| Number of cutting edges | 10 | 8 |
| Grade | AH725 | PVD |
Cutting conditions
| Tungaloy | Competitor | |
|---|---|---|
| Cutting speed V/c (m/min) | 54 | 68 |
| Feed per tooth f/z (mm/t) | 0.03 | 0.02 |
| Feed speed Vf (mm/min) | 50 | 31.5 |
| Depth of cut ap (mm) | 2 | 2 |
| Width of cut ae (mm) | 50 | 50 |
| Coolant | Wet | Wet |