RoundSplit – Stabilizer – AH725
IMPROVED TOOL LIFE & PRODUCTIVITY
High productivity and longer tool life
- Machining of long shafts with supports just at the end-faces problems of vibration during machining. This results in limited cutting speeds and also lower tool life.
- Roundsplit’s MJ geometry’s low cutting force and popular wear resistant AH725 grade allows stable and 3 times long tool life even at 40% higher cutting speeds.
Share
| Industry | Engineering |
|---|---|
| Component | Stabilizer |
| Material ISO code |
 P - Steel |
| Work material | High alloyed steel |
| Machine(spindle type) | Vertical Machining Center Middle(#40,HSK63) |
| Tool family | Milling |
| Tool category | Face milling |
| Product name | RoundSplit |
| TSR No. | 248M |
Tool
| Tungaloy | Competitor | |
|---|---|---|
| Body | TRC12R080M27.0E07 | Round insert cutter |
| Effective number of teeth | 7 | 7 |
| Cutting diameter | 80 | 80 |
| Insert | RCMT1204EN-MJ | Round insert |
| Grade | AH725 | PVD |
Cutting conditions
| Tungaloy | Competitor | |
|---|---|---|
| Cutting speed V/c (m/min) | 100 | 70 |
| Feed per tooth f/z (mm/t) | 0.1 | 0.1 |
| Feed speed Vf (mm/min) | 279 | 195 |
| Depth of cut ap (mm) | 5 | 5 |
| Width of cut ae (mm) | 40 | 40 |
| Coolant | Internal+external | Internal+external |